The Muc-Off Tubeless Tag Holder offers a discreet way to install a tracker inside your rear tubeless bicycle tyre in conjunction with our Tubeless Valves, meaning you can track down your bike down in the event of theft and can locate it using the Find My iPhone App.
Your tracker will be housed in a protective, 3-part silicone and rubber tubeless valve mount and supplied with our range of tubeless valve bases, so you can ensure an airtight seal is achieved against your rim when installing inside your tubeless tyre.
Please note: AirTag Tracker is not included with the mount, sold separately.
Fitting a tracker to Tubeless Tag Holder:
Fitting into wheel:
If using the Tubeless Tag Holder with a brand new tubeless set up and tyre, we would recommend inflating and snapping the tyre bead to the rim using your tubeless valve without the Tubeless Tag Holder fitted first. This is because the Tubeless Tag Holder may limit the larger quantity of airflow required for the initial tubeless set up. Then remove the valve and fit to the Tubeless Tag Holder using the fitting process and steps above.
NB: Periodically remove the tracker from the mount and dry off any excess tubeless sealant when replacing or topping up your sealant.
You may need to replace the battery inside your tracker every 6 months to 1 year.
We accept no responsibility or liability for any damage to the tracker as a result of using it with our tubeless valve mount system.
Muc-Off Ltd and any of its group / connected companies are not liable for any loss of property or theft in relation to the use of this product. We recommend you use a high-quality lock whenever leaving your bike unattended or in your garage or home.
Will the system cause any damage to the AirTag?
Over the course of 6+ months of extensive real-world testing inside many different wheels we haven't experienced any damage to the AirTag as a result of using the Tubeless Tag Holder. The built in sacrificial and compressive layer integrated into the system has been designed to ensure impacts are minimised to help protect your rim and the AirTag.
We do however recommend periodically removing your AirTag from the mount and dry off any excess tubeless sealant when replacing or topping up your sealant to ensure it is still working properly.
Is Tubeless Tag Holder waterproof?
No, it is not fully waterproof however we have designed the system to encapsulate the AirTag as best as possible and the AirTags being placed inside are IP67 standard meaning they are water resistant.
Will Tubeless Tag Holder work with other tracking devices?
Unfortunately not. We have designed Secure Tag holder to fit the AirTag specifically. We are looking into other devices though for both Bicycles and Motorcycles, which will work with Apple and other devices.
Can you run a tubeless insert with the tubeless tag holder?
No, unfortunately not.
Will the Tubeless Tag Holder work with my innertubes?
No, this is designed for bike wheels running a tubeless setup.
Can I use this on either the front or back wheel?
We strongly recommend that you use this on your rear wheel.
How much does it weigh?
The Stealth Tubeless Tag Holder weighs 7.5g without the AirTag & 18.7g with an AirTag.
PLEASE NOTE THAT THE TUBELESS TAG HOLDER IS ONLY COMPATIBLE WITH TUBELESS SETUPS. DESIGNED FOR USE ON REAR WHEEL.
Compatible tyre types:
We recommend only using Stealth Tubeless Tag Holder with our No Puncture Hassle Tubeless sealant
Not Included - Sold Separately
Fits inside your tubeless setup wheel for discreet tracking. Thieves won't know what's coming.
Screws onto the tubeless valves included in the pack, or use your own Muc-Off All-New Tubeless Valves for added bling.
Do you want to shop on our UK site?
Do you want to shop on the EU site?
Do you want to shop on the US site?