B.A.M quickly inflates and repairs punctures at the same time by injecting latex foam and air into a tyre or tube. B.A.M is the perfect emergency backup that can be strapped to a bike frame using the new Muc-Off B.A.M Utility Belt (sold separately) or carried in a ride pack. Compatible with road, cx/gravel and MTB wheels as well as most tubeless sealants. Will inflate a 29” MTB tyre in under a minute and capable of sealing holes 3-4mm.

  • Pink Synthetic Latex foam sealant and inflation
  • Nozzle fits both Presta and Schrader valves
  • Compatible with Road, CX/Gravel and MTB wheels
  • Inflates a 29” MTB tyre & 700c Road tyre in under a minute
  • Seals holes up to 3-4mm
  • Does not contain ammonia
  • Compatible with most tubeless sealants.

Directions for use:

  1. check tyre to make sure there is nothing still inserted and carefully remove if there is
  2. check the valve and make sure its clear and open if presta check the core is not damaged by pressing it in.
  3. shake Bam can
  4. move the valve to the top of the wheel
  5. carfully insert bam nozzle over valve
  6. push up on the can with a little force ( not to hard) to release the sealant and air
  7. Once inflated and up to pressure remove bam and wipe any excess foam off
  8. spin the wheel to aid coating inside. Top tip on really big hole you can use your thumb over it to help it cure


Directions for use:

  1. Undo the strap from the packaging
  2. Locate area to fit
  3. Place the non-smooth rubber side against area intended to fit ( seat post or frame)
  4. Insert the strap in one side and loop around area and back into itself
  5. Inset Bam by bringing the strap back across the can and into the hinge bit.
  6. Pull back on it tight and secure it with its Velcro